Pass Cisco Certification Exam 100-105 Braindumps
Get Free Cisco 100-105 exam dumps Questions Answers
A workstation has just resolved a browser URL to the IP
address of a server. Which protocol will the workstation now use to determine
the destination MAC address to be placed into frames directed toward the sever?
A. ARP
B. RARP
C. DNS
D. DHCP
E. HTTP
Answer: A
What is the default lease time for a DHCP binding?
A. 24 hours
B. 12 hours
C. 48 hours
D. 36 hours
Answer: A
A. ARP
B. RARP
C. DNS
D. DHCP
E. HTTP
Answer: A
What is the default lease time for a DHCP binding?
A. 24 hours
B. 12 hours
C. 48 hours
D. 36 hours
Answer: A
Which RFC was created to alleviate the depletion of IPv4
public addresses?
A. RFC 4193
B. RFC 1519
C. RFC 1518
D. RFC 1918
Answer: D
A. RFC 4193
B. RFC 1519
C. RFC 1518
D. RFC 1918
Answer: D
Which two of the following are true regarding the configuration of RouterA? (Choose two.)
A. at least 5 simultaneous remote connections are possible
B. only telnet protocol connections to RouterA are supported
C. remote connections to RouterA using telnet will succeed
D. console line connections will never time out due to inactivity
E. since DHCP is not used on Fa0/1 there is no need to use the NAT protocol
Answer: AC
Which function enables an administrator to route
multiple VLANs on a router?
A. IEEE 802.1X
B. HSRP
C. port channel
D. router on a stick
Answer: D
Which NTP command configures the local device as an NTP reference clock source?
A. ntp peer
B. ntp broadcast
C. ntp master
D. ntp server
Answer: C
A. IEEE 802.1X
B. HSRP
C. port channel
D. router on a stick
Answer: D
Which NTP command configures the local device as an NTP reference clock source?
A. ntp peer
B. ntp broadcast
C. ntp master
D. ntp server
Answer: C
Which NAT type is used to translate a single inside
address to a single outside address?
A. dynamic NAT
B. NAT overload
C. PAT
D. static NAT
Answer: D
Which option is a valid hostname for a switch?
A. 5witch-Cisco
B. Switch-Cisco!
C. 5witchCisc0
D. SwitchCisc0
Answer: D
A. dynamic NAT
B. NAT overload
C. PAT
D. static NAT
Answer: D
Which option is a valid hostname for a switch?
A. 5witch-Cisco
B. Switch-Cisco!
C. 5witchCisc0
D. SwitchCisc0
Answer: D
Which statement about static
routes is true?
A. The source interface can be configured to make routing decisions.
B. A subnet mask is entered for the next-hop address.
C. The subnet mask is 255.255.255.0 by default.
D. The exit interface can be specified to indicate where the packets will be routed.
Answer: D
Which two statements describe the IP address 10.16.3.65/23? (Choose two.)
A. The lowest host address in the subnet is 10.16.2.1 255.255.254.0.
B. The last valid host address in the subnet is 10.16.2.254 255.255.254.0.
C. The network is not subnetted.
D. The broadcast address of the subnet is 10.16.3.255 255.255.254.0.
E. The subnet address is 10.16.3.0 255.255.254.0.
Answer: AD
A. The source interface can be configured to make routing decisions.
B. A subnet mask is entered for the next-hop address.
C. The subnet mask is 255.255.255.0 by default.
D. The exit interface can be specified to indicate where the packets will be routed.
Answer: D
Which two statements describe the IP address 10.16.3.65/23? (Choose two.)
A. The lowest host address in the subnet is 10.16.2.1 255.255.254.0.
B. The last valid host address in the subnet is 10.16.2.254 255.255.254.0.
C. The network is not subnetted.
D. The broadcast address of the subnet is 10.16.3.255 255.255.254.0.
E. The subnet address is 10.16.3.0 255.255.254.0.
Answer: AD
